ARPM

  

• The fabric roll are passed into the machine through belt conveyer system..
• Fabric Roll ready for packing is pushed from belt conveyer for wrapping by a pneumatically operated plate. The fabric roll gets wrapped by polythene sheet in the process and is ready for width wise sealing..
• The width wise sealing and cutting of the fabric roll is done by the vertical movement of top sealing bar which completes the warping of polythene on the fabric roll and also performs width sealing of the polythene sheet. 
• Once the width wise sealing is complete, the roll is moved forward to the side sealing assembly. 
• The polythene ends on either sides of the roll are pulled together for proper side sealing and cutting by suction pumps. 
• Pneumatic operated side sealing bars perform the side sealing and cutting of the extra polythene thus completing the basic packing operations. 
• The sealing bars have special sealing and cutting wires running across them that are automatically heated at the time of sealing and cutting operations.
• On the completion of side sealing, the packed fabric roll is transferred to a heat chamber so as to crimp the polythene tightly over the fabric roll. This ensures packing without air gat\ps in the rolls. 
• The complete system is PLC controlled and the electricals are placed inside a separate box for the convenience of the operator and the maintenance staff.

  

•  Fabric Width Range : within 20" of your maximum fabric width.
•  Power Requirements : 1.5 H.P. / 440 Volts / 3 Phase / 50 Hz.
•  Pressure Requirements : 5 Bar
•  Cycle Time : 1 min.
•  Roll Diameter : 6" to 18"(Can be designed for non-standard diameter)

  

The ALMAC Group has designed and developed Semi-automatic Roll Packing Machine to enable high speed and high quality fabric roll packing. This state of the art design facilitates both bottom and side sealing of the fabric roll while providing a high quality finish output. This machine can be either used individually or can be put behind a batching device so that instantaneous sealing of fabric rolls would be possible before storage. You tell us your module mix, and we will integrate them in just the right way to suit your needs.

  

Motorised Cutting of Polythene Sheet :
A motorized cutter can be provided, which by press of a button would slit the polythene.

Material Handling System using Conveyers for input and output of fabric rolls :
Belt and roller conveyers designed to handle fabrics rolls can be provided which would automate the feeding and delivery of the rolls to the packing machine.

Weigh Mac :
A digital weighing device, which enables weighing of the fabrics rolls before they are sent to the warehouse for storage.

Higher Levels of Automation :
Our designers at The ALMAC Group are working on fully automating this machine in order to improve the efficiency and remove the human interference to the minimum thus giving better throughput and quality. We also undertake customizations to suit individual needs and requirements. Please contact us to personalize your systems.

Bar Coding :
In order to tack the fabrics roll once they have been stored, we can provide a bar-coding arrangement through out the system. At the packing machine, a bar-coding scanner and printer can be provided for final label printing before storage.